Discount Applied Automatically

BUY Kickstop WIDE London Bar Standard Staple (Short/ Wide)
Kickstop
Product Code: 9616
Add to cart
  • Description

  • Code: 9616
  • Standard size 'D' shape staple to fit over a lock staple/keep which is 30mm x 70mm - or less
  • 24" (610mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw 

9616 dimensions - 610mm long x 20mm wide x 5mm thick

Wide Bar (a narrower version is available - 16mm - product code 9608)

Kickstop Bars are manufactured from specially rolled superior grade, 5mm thick solid steel bar with rounded sides. Each fixing hole is a countersunk hole to ensure that the countersunk screw heads can be fitted flush with the surface of the flat bar.

Kickstop London Bars are manufactured from one continual length of high grade steel - and have no unsightly welding.

A packet of 2 1/2" long, No. 10 countersunk hardened steel woodscrews is supplied.

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

Related Products

Birmingham Bar for Door Frame
The Birmingham Bar frame reinforcer will greatlystrengthen and reinforce the door frame on one or both internal faces of an inward opening door. It is very highly recommended by crime prevention specialists,isused with existing locks and providesextremely effective additional security every time the door is closed and locked. It can be used on the internal face of the door frame - adjacent to the hinges It can be used on the internal face of the door frameon the lock side - if no rim lock staple exists It can be used on the external face of the door frame - on an outward opening door (when fitted externally - we suggest the use of security screws or the burring of thescrews supplied) There are several versions of theKickstop steel Birmingham Bar 2014 (26" long), 2614 (72" long) and 9614 (78" long) - these are all 16mm (5/8") wide 2015 (26" long) and 9615 (78" long) - these are both 20mm (3/4") wide

BUY DeadlockGuard
The DeadlockGuard is available in:Five sizesThree keywaysFive polyester powder coated architectural finishesThree polished and plated finishes All Kickstop DeadlockGuards:Clamp together, around the mortice deadlockProvide superior protectionProvide superior resistance against kick-in attacks, forced entry and burglary

BUY SashlockGuard
As the description implies, a mortice lock is morticed into the door. Choosing and fitting a LockGuard to a door fitted with a 'standard' mortice deadlock is relatively straightforward and Kickstop supplies the largest selection of DeadlockGuards available for this purpose. A sashlock however, generally requires more wood to be removed than a deadlock and has an additional hole drilled through the door for the lock spindle to pass through. Kickstop's unique SashlockGuard has reversible offset plates to allow fitting even if the frame has wider door stops and draught excluder. The elongated apertures in the SashlockGuard plates are designed to accommodate the spindle and keyway/cylinder of most sashlocks. Use with existing lever lock furniture as shown in the enlarged illustration Fitting a mortice sashlock, or deadlock, involves removing wood from the door This leaves a very weakened area around the mortice lock The Kickstop Door Reinforcer will help remedy this problem The Kickstop LockGuards The SashlockGuard is for use with a mortice sashlock The DeadlockGuard is for use with a mortice deadlock Mortice sashlock - for illustration purposes only