StapleGuard for Door Frame

stapleguard

 

 

The StapleGuard is bolted together through the frame - around the rim lock staple (keep)

The StapleGuard (originally known as - London Frame Reinforcer):

This bolt through version of the London Bar has two plates.

The external plate is flat with a bevelled edge designed to resist side impact.

The internal plate has a 'D' shaped staple to fit over the rim lock staple.

Supplied with 4" long bolt fixings.

  

 

Before ordering

Very carefully check that the StapleGuard staple size that you order, is the correct size that you need to fit over the door's nightlatch or rim lock staple (keep).

If in doubt, please read the section on London Bar

  

 

 

 

2004 Universal Staple 

(30mm x 97mm)

This is a large size staple that can be slightly 'reduced' by using the two fixings 

 

9603 Standard Staple

(30mm x 70mm)

To fit over the staple of a smaller size nightlatch

 

9604 Large Staple

(30mm x 97mm)

To fit over the staple of a larger size rim lock or nightlatch

 

 

9605 Ingersoll Staple

This is a 'non-handed' StapleGuard with a 30mm x 70mm Standard staple - to fit over the left or right handed Ingersoll SC71

It will fit over the lock staple and has a small cut out section to allow the springbolt of the lock to pass through.

 

BUY StapleGuard

  

Tel: 01536 790999    Fax: 01536 790710    E-mail: info@doorguard.co.uk 

  • Code: 2004 WH
  • 'Universal' size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • White Colour
  • A four bolt steel StapleGuard for most sizes of staple
  • 20mm wide
  • Bolt through version of the London Bar
  • To Reinforce and Strengthen Wooden Door Frame
  • Code: 9603
  • Standard size 'D' shape staple to fit over lock staple/keep which is 30mm x 70mm - or less
  • A four bolt StapleGuard for smaller sizes of staple
  • 20mm wide
  • Bolt through version of the London Bar
  • To Reinforce and Strengthen Wooden Door Frame
  • Code: 9604
  • Large size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • A four bolt StapleGuard for larger sizes of staple
  • 20mm wide
  • Bolt through version of the London Bar
  • To Reinforce and Strengthen Wooden Door Frame
  • Code: 9605
  • A four bolt StapleGuard to fit over the Ingersoll SC71 rim lock.  The 9605 staple has a cut out to allow the Springbolt of the lock to pass through - not illustrated **
  • 20mm wide
  • It is not 'handed' and can be fitted on the left or right side of the door frame.
  • Bolt through version of the 9612/9613 London Bar
  • To Reinforce and Strengthen Wooden Door Frame